CNC Setup Machinist 3rd shift
Location:
North Charleston , South Carolina
Posted:
December 17, 2017
Reference:
038836-en-us
Eaton Aerospace Group located in N. Charleston, SC has an opening for a Setup Operator on 3rd shift. This position will lead the transition/changover between production runs on various CNC machines such as mills and lathes then operate select machines through the remainder of the production run while ensuring quality parts from the work cell.
 
The specific functions of this position include the following:
  1. Properly set tools in machine locations required for set-up
  2. Perform part changeover including program retrieval and input
  3. Effectively us pre-setter arm or tool setter and comp tools
  4. Read and edit machine programs
  5. Calculate and input axis coordinates X, Y and Z or use spindle probe to load offsets
  6. Establish Z set-up position for sub-spindle
  7. Change out all tooling and properly build mill tools
  8. Calibrate pre-setter arm by resetting parameters or tool settler or spindle proble
  9. Recognize and eliminate machine alarms
  10. Troubleshoot and eliminate variations that are out of process; i.e. run-out, flatness problems.
  11. Cross train other employees in machine operations
  12. Read and understand complex engineering drawings
  13. Read, understand, and rest machine program codes
  14. Follow all Eaton safety policies and standards
  15. Fulfill the requirements of the Quality Policy and Quality Management System
  16. Maintain a clean and safe working environment adhering to 5S Principles
  17. Other duties as assigned
  18. Perform all functions of the operator role:
    1. Properly start or restart equipment after power is interrupted or as a new start up.  Re-zero all axes and begin machining process at proper point in program. 
    2. Keep machines consistently running
    3. Identify non conformances utilizing trace, CMM and various inspection methods
    4. Adjust and make offsets to bring parts within tolerance
    5. Read and utilize process plan, blueprints, and program in prescribed sequence
    6. Properly place parts, casting or stock in machine securely and accurately
    7. Operate machines to perform prescribed functions on drawings
    8. Read and interpret complex engineering drawings, blueprints, customer specification and internal drawings and procedures
    9. Utilize Geometric Dimensioning and Tolerancing
    10. Bring machine tool back to desired location and resume cycle if cycle has been interrupted.  Understand function of proper usage and resetting of Emergency Stop Button
    11. Ensure tool lengths correspond to offset register. Have full working knowledge of tool presetter
    12. Identify alarm codes and respond with corrective measures
    13. Understand status lights, door interlocks, interlock released light and button.  On/off buttons, and panel lock key. 
    14. Understand  multi-screen functions, alpha and numeric keypads and machine controls (i.e. alter, insert, delete, input, up, down, lft ,rght, pos, prog, system, message, settings, network, etc.)
    15. Operate and Understand function of mode switch and function keys (i.e. mem, mid, tape, edit, handle, job, rapid, zero return, SBK. OSP. BDT. PSM. PST. DRN).
    16. Properly use directional jog buttons, rapid traverse override buttons, and feed rate override buttons
    17. Determine and input proper wear and geometry offsets
    18. Evaluate tooling to determine if free from breaks, chips and abnormal wear

Qualifications

       Basic Qualifications: 
  • High School Diploma or equivalent from an accredited institution required.
  • Minimum three (3) years’ experience operating CNC machines in a manufacturing environment or comparable education
  • Minimum one (1) years’ experience setting up CNC machines
  • Candidates must be legally authorized to work in the United States without company sponsorship.
  • This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
       Preferred Qualifications:
  • Five (5) years’ experience operating CNC machines in a manufacturing environment
  • Two (2) years’ experience setting up CNC machines
  • Experience using lean or lean tools
  • Technical degree in manufacturing, machining, or related field
 
 

Eaton is a power management company with 2016 sales of $19.7 billion. We provide energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton is dedicated to improving the quality of life and the environment through the use of power management technologies and services. Eaton has approximately 95,000 employees and sells products to customers in more than 175 countries. For more information, visit Eaton.com. At Eaton we see things differently. We see opportunities to innovate, go above and beyond, and we work hard because what we do reflects who we are. If you see things differently – if you’re determined, motivated and focused on improving the world around you – then it’s time to see where a career at Eaton can take you. For more information visit www. Eaton.com/careers.

Job: Manufacturing & Operations

Region: North America – US/Puerto Rico
Organization: AER FMC Fuel Motion Control Systems

Job Level: Entry Level
Schedule: Full-time
Is remote work (i.e. working from home or another Eaton facility) allowed for this position?: No
Does this position offer relocation?: Relocation from within United States and / or Puerto Rico
Travel: No


A little about us:
Eaton is a global technology leader in power management solutions. We make power operate more efficiently, effectively, safely & sustainably.

Know someone who would be interested in this job? Share it with your network.