Please list Hirepurpose as source when you apply
Steel Press Operator, HVAC - Wichita, KS
Location:
Wichita , Kansas
Posted:
November 21, 2017
Reference:
143683
Johnson Controls has multiple job openings at our plant in Wichita, KS. For immediate consideration for employment opportunities available at our location, please contact our local staffing agency partner, Randstad. __________________________________________________________________________

SUMMARY
To operate single stroke mechanical presses 70 tons and up, to blank, punch and form parts.

QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Must attend and pass the Johnson Controls Manufacturing Training, Safety class and the Pre-Press Safety orientation with the Training Department. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.
Read and understand blue prints, job instructions, and material movement to and from work station and gets work station, keep work station and equipment in clean and ready condition.
Operates press to punch and form parts per specifications.
Adjusts and tightens hold down bolts, dies, springs, and pins. Lubricates material and parts as required and insure proper operation of all safety devices.
Complete all required and assigned paperwork.
Performs 5'S activities daily as outlined by supervisor for job station.
Complies with all quality checks every fifty (50) pieces as well as first part and last part inspection or every 30 minutes.
Maintains quality standard, keeps work station in order, reports work shortages, and performs own rework.
Overtime is required to meet production demands and can include Saturdays and Sundays when necessary.

EQUIPMENT, TOOLS, AND MATERIALS: Straightside, gap frame, obi, mechanical presses of over 70 ton capacity, dies, vacuum and magnetic sheet lifters, parts containers, material handling equipment such as forklifts, oil spray guns, brushes, gauges such as rulers, micrometers, calipers, safety devices, small hand tools, metal sheets, coils, parts, scrap, lubricants, drawing compounds.

U.S. EQUAL EMPLOYMENT OPPORTUNITY COMMISSION
Kansas City Area Office
NOTICE TO EMPLOYEES

This Notice is being posted as part of the remedy agreed to pursuant to a conciliation agreement between Johnson Controls, Inc. and the Equal Employment Opportunity Commission.

Federal law requires that there be no discrimination against any employee or applicant for employment because of the in individual's race, color, religion, sex, national origin, age (40 and over), disability, or genetic information with respect to hiring, promotion, firing, compensation, or other terms, conditions or privileges of employment.

Johnson Controls, Inc. supports and will comply with such Federal law in all respects and will not take any action against employees because they have exercised their rights under the law.

Specifically, Johnson Controls, Inc. will not: (1) base employment decisions on the disability or perceived disability of an applicant; (2) make pre-offer of employment medical inquires or examinations; or (3) use the Medical Questionnaire, Tinel's Sign, Phalen's Maneuver, or Finkelstein's tests in the medical examinations of applicants or employees to determine susceptibility to Carpel Tunnel Syndrome prior to any offer rind acceptance of employment. In the future, if any applicants for temporary employment experiences illegal discrimination based on the Company's conduct, such individuals will be made whole for any losses they incurred as a result of such conduct, consistent with legal requirements.

#external

EDUCATION and/or EXPERIENCE
High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and Operational Method Sheets (OMS).

MATHEMATICAL SKILLS
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.

REASONING ABILITY
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.

WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly exposed to vibration. The employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually loud.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Never = 0%, Occasionally = 1%-33%, Frequently = 34%-65%, Constantly = 66%-100%, E=Essential Function

Specific Job Demands Amount of Time Activity
Never Occasionally Frequently
Constantly

Floor to waist lift

E

Above waist lift

E

Bilateral carrying

E

Unilateral carrying


Push

E

Pull

E

Sit



Stand


Forward bending standing



Forward bending sitting


Kneel


Squat



Supine laying


Stair climbing



Walk



Crawl


Ladder climbing



Trunk rotation - standing

E

Trunk rotation - sitting



Reach - above shoulder



Reach - at shoulder or below


Handling


Fingering


Forceful gripping



Manual Materials
Handling Activity
Maximum
Weight
Maximum
Distance (V/H)
Floor to waist lift
45 lbs
Variable (12" to 36")
Above waist lift
45 lbs
Variable (36" to 53")
Bilateral carry
45 lbs
10 feet
Push
80 lbs
5 feet
Pull
65 lbs
5 feet

SAFETY POLICIES: The employee in this job must be knowledgeable of and follow all company safety policies and procedures.

The above description is concise, and is not intended to include all details of the job.

A little about us:
We’re shaping the future. Together, let’s make a world that’s safe, comfortable and sustainable. Tomorrow needs you.

Know someone who would be interested in this job? Share it with your network.